Multideck Lift Type Shaking Table

Multi-Layer Shaking Table: Maximize Capacity in Minimal Space

The Multi-Layer Shaking Table (also known as a Multideck or Suspended Shaking Table) is an innovative gravity separation equipment designed to solve the biggest problem in concentration plants: floor space. By stacking multiple fiberglass decks (typically 2 to 4 layers) vertically, this machine multiplies your processing capacity by 3 to 5 times per square meter compared to traditional single-deck tables.

Beyond space savings, our Suspended Shaking Table features a revolutionary self-balancing inertia mechanism. Unlike older 6-S models that require massive, expensive poured-concrete foundations to absorb the shaking forces, this suspended design produces no vertical jump. It can be bolted directly onto light steel frames or installed on upper-level floors of multi-story processing plants.

Capable of handling fine particle sizes ranging from 2mm down to 0.022mm, this Double Deck Shaker Table (and multi-deck variants) is highly effective for the roughing, cleaning, and scavenging of tungsten, tin, tantalum, niobium, gold, and other heavy metals.

Core Advantages of the Multideck Shaker

• 300% Space Utilization: The vertical, multi-deck layout allows you to triple your plant's throughput without expanding the building, significantly reducing capital expenditure on plant construction.
• No Concrete Foundation Required: The inertia bed structure uses a suspension system with steel cables to self-balance the reciprocating forces. This eliminates friction power loss and allows for rapid, flexible installation on light structural steel.
• 40% Energy Reduction: Because the heavy decks are suspended rather than dragging on sliding rails, the friction is drastically reduced. This allows the machine to be driven by smaller motors, saving substantial energy.
• Variable Frequency Control (VFD): Equipped with stepless speed regulation, allowing operators to precisely adjust the stroke frequency to match varying feed conditions and ore types.

Industry Applications

Multideck tables are ideal for high-capacity flowsheets and space-restricted environments (like floating dredges or containerized plants):

• Precious Metals: Cleaning rough concentrates of alluvial gold and silver to a smeltable grade.
• Non-Ferrous Base Metals: High-volume recovery of tungsten (wolframite) and tin (cassiterite).
• Ferrous Metals: Upgrading fine-grained iron and manganese ores.
• Coal & Non-Metallics: Separation of fine coal from high-ash impurities.

Technical Parameters (Double-Deck Series)

Below are the standard specifications for our Double-Layer (DL) models. Similar to our standard tables, these can be configured with specific deck surfaces for Coarse Sand or Fine Sand. Triple and Quad-deck configurations are available upon custom request.

Frequently Asked Questions (FAQ)